Comprehensive VPS Security: Deploying SSH3 Protocol Based on HTTP3 QUIC to Eliminate Port Scanning Risks
Comprehensive VPS security using SSH3 over HTTP3 QUIC eliminates port scanning risks from automated tools like Zmap or Masscan. This guide details setup, configuration, firewall...
Comprehensive VPS security using SSH3 over HTTP3 QUIC eliminates port scanning risks from automated tools like Zmap or Masscan. This guide details setup, configuration, firewall rules, and validation steps for maximum protection.
Overview of SSH3 and HTTP3 QUIC
SSH3 is the next-generation SSH protocol designed to enhance security, performance, and compatibility with modern protocols like HTTP3. HTTP3, built on QUIC, uses UDP instead of TCP to reduce latency and improve data transfer speed, while integrating TLS 1.3 encryption from the start. When combined with SSH3, this creates a secure, anonymous, and high-efficiency communication channel that protects VPS servers from common network attacks, especially traditional TCP-based port scanning. The protocol not only encrypts data in transit but also hides IP addresses and eliminates easily detectable connection traces.
Requirements and Preparation
To deploy SSH3 over HTTP3 QUIC, your VPS must meet the following requirements:
- Operating System: Linux (Ubuntu 22.04 LTS or Debian 12)
- SSH Version: SSH 9.0 or higher (with SSH3 support)
- HTTP3 Support: Libraries such as nghttp3 or quiche for QUIC and HTTP3
- Integrated WAF or nftables for access control
- Valid SSL/TLS certificate (Let's Encrypt can be used)
Begin by updating the system and installing necessary packages:
sudo apt update
sudo apt upgrade -y
sudo apt install ssh nghttp3 quiche -y
Ensure that QUIC is supported by Linux kernel 5.10 or higher. Verify with the command:
uname -r
Setting Up SSH3 on HTTP3 QUIC
To deploy SSH3 over HTTP3 QUIC, configure SSH to use this protocol instead of traditional TCP. Start by creating a custom SSH configuration file:
# /etc/ssh/sshd_config
Protocol 2
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_ecdsa_key
HostKey /etc/ssh/ssh_host_ed25519_key
# Enable SSH3 over HTTP3 QUIC
UseHTTP3 yes
HTTP3Port 443
# Optional: Restrict access to specific IP ranges
AllowUsers user1 user2
# Enable QUIC-specific settings
QUICMaxIdleTimeout 300
QUICMaxStreams 100
After configuration, restart the SSH service:
sudo systemctl restart ssh
To ensure HTTP3 QUIC connections work, configure WAF or nftables to open port 443 (HTTPS) and forward HTTP3 requests to the SSH service. For example, with nftables:
table ip filter {
chain input {
type filter hook input priority 0;
# Allow HTTP3 QUIC on port 443
udp dport 443 accept
# Allow SSH over HTTP3
tcp dport 443 accept
# Default drop
counter drop
}
}
Testing and Validation
After deployment, validate the system integrity using the following commands:
- Check SSH service status:
sudo systemctl status ssh
ss -tuln | grep 443
ssh -o "UseHTTP3=yes" -o "HTTP3Port=443" user@vps-ip
zmap -p 22 vps-ip
If no response is returned from scanning tools, the system has successfully hidden the SSH port and achieved effective protection.
Alternative Solutions and Limitations
While SSH3 over HTTP3 QUIC offers high security, it has some limitations:
- Incompatible with all SSH clients, especially older versions.
- Requires HTTP3 and QUIC support, which may not be available on all operating systems.
- Complexity in debugging connection issues due to encryption and protocol complexity.
For such cases, consider combining with advanced SSH port hiding techniques like the knocking protocol with nftables, detailed in the article [Advanced SSH Port Hiding with Knocking Protocol and nftables Against Zmap Masscan](/en/blog/an-giau-port-ssh-tinh-vi-bang-giao-thuc-knocking-doi-moi-voi-nftables-tuyet-chieu-chong-lai-moi-cong-cu-quet-cong-zmapmasscan).
Troubleshooting
If SSH over HTTP3 QUIC fails to connect, check the following:
- Does the SSH version support SSH3?
- Is the firewall or WAF correctly opening port 443 and forwarding traffic?
- Are SSL/TLS certificates valid?
- Is the connection blocked by a browser or proxy?
For QUIC-related issues, verify the kernel and associated libraries. Kernel updates or reinstallation of nghttp3 may be required.
References
For further reading on comprehensive VPS security, refer to the following articles:
- [Comprehensive Shared Hosting Security via Linux Kernel Hardening with grsecurity/PaX](/en/blog/bao-mat-he-thong-shared-hosting-toan-dien-bang-cach-hardening-linux-kernel-voi-grsecuritypax)
- [Comprehensive Container Security: Using eBPF Tetragon to Monitor and Block Unauthorized System File Writes](/en/blog/bao-mat-container-toan-dien-ung-dung-ebpf-tetragon-de-theo-doi-va-tu-dong-ngan-chan-hanh-vi-ghi-de-file-he-thong-trai-phep)
- [Comprehensive Microservices Security: Guide to Setting Up mTLS with Traefik v3 and Casdoor](/en/blog/bao-mat-he-thong-microservices-toan-dien-huong-dan-thiet-lap-mtls-voi-traefik-v3-va-casdoor)
- [Cosmos Cloud: Breakthrough All-in-One Server Solution with Integrated Zero Trust and WAF](/en/blog/cosmos-cloud-giai-phap-may-chu-all-in-one-dot-pha-voi-zero-trust-va-waf-tich-hop)
For more information on DPTCloud's security infrastructure and 99.98% SLA, visit [Network Security & 99.98% SLA Infrastructure at DPTCloud](/en/infrastructure).
Related infrastructure & engineering guides: Cloud VPS with L3/L4/L7 Anycast Anti-DDoS · Comprehensive Shared Hosting Security via Linux Kernel Hardening with grsecurity/PaX
Recommended NVMe Cloud VPS Plans to Deploy This Setup
Enterprise RAID 10 NVMe SSDs, CMC & FPT District 9 uplinks with Anycast Anti-DDoS and 99.99% SLA.
VPS-3E
10% VAT included
- CPU: 2 vCPU
- RAM: 4 GB
- SSD: 50 GB NVMe
