Configure Anycast DNS with Knot DNS and GeoIP on 3 VPS to Optimize Domain Resolution Time in Vietnam
A detailed guide to setting up an Anycast DNS system using Knot DNS and GeoIP on 3 VPS servers to reduce domain resolution time in Vietnam, improving website and API access performance.
Introduction to Anycast DNS and Benefits in Vietnam
In Vietnam, where internet usage continues to grow rapidly, optimizing DNS resolution time is essential for enhancing user experience. Anycast DNS is an effective solution that reduces latency by routing DNS queries to the nearest network server. By deploying this system across 3 VPS servers distributed in different regions of Vietnam, the service can deliver faster and more stable DNS responses.
Knot DNS is a high-performance, open-source DNS server designed for environments requiring speed and reliability. When combined with GeoIP, the system can route DNS queries to the VPS closest to the user based on their IP address, minimizing response time.
Requirements and Preparations Before Deployment
Hardware and Software Requirements
- 3 VPS servers (each with at least 2GB RAM, 1 vCPU, and good network connectivity)
- 3 public IP addresses (one per VPS)
- Operating system: Ubuntu 22.04 LTS or Debian 11
- Software: Knot DNS, GeoIP database, DNS client (bind9 or unbound)
Network Preparation
Ensure that the VPS servers can communicate with each other over the internal or public network. Open the following ports: 53 (UDP/TCP), 1053 (UDP/TCP if using xfr), and the management port (if applicable).
Deploying Knot DNS on Each VPS
Install Knot DNS
On each VPS, run the following commands:
sudo apt update
sudo apt install knotd
Configure Knot DNS
Create the configuration file `/etc/knot/knot.conf` with the following content:
server:
ip4: 127.0.0.1@53
ip4: <IP_VPS_1>@53
ip4: <IP_VPS_2>@53
ip4: <IP_VPS_3>@53
ip4: <IP_VPS_1>@1053
ip4: <IP_VPS_2>@1053
ip4: <IP_VPS_3>@1053
zone:
name: "example.com"
file: "/var/lib/knot/example.com.db"
type: master
acl:
name: "any"
ip: 0.0.0.0/0
control:
ip: 127.0.0.1@1053
acl: "any"
Replace `<IP_VPS_1>`, `<IP_VPS_2>`, and `<IP_VPS_3>` with the actual IP addresses of each VPS.
Start the Service
sudo systemctl enable knotd
sudo systemctl start knotd
Integrating GeoIP for Query Routing
Download GeoIP Database
Run the following command to install the GeoIP database:
sudo apt install geoip-database
Run Query Routing Script
Create the script `/usr/local/bin/geoip-dns-routing.sh`:
#!/bin/bash
IP=$1
COUNTRY=$(geoiplookup $IP | cut -d' ' -f5)
case "$COUNTRY" in
"VN")
echo "127.0.0.1" # Route query to the VPS in Vietnam
;;
*)
echo "127.0.0.1" # Route query to the nearest VPS (possibly in another region)
;;
esac
Make the script executable:
sudo chmod +x /usr/local/bin/geoip-dns-routing.sh
Testing and Performance Monitoring
Run Test Commands
Test from multiple locations in Vietnam:
dig @127.0.0.1 example.com
Compare response times across different locations.
Monitor Performance
To track performance, use NetData. For detailed instructions, refer to: Install and Configure NetData on VPS for 1-Second System Performance Monitoring with 0.1s Latency.
Troubleshooting
Unable to Access DNS
Check if the Knot DNS service is running:
sudo systemctl status knotd
If not running, check the logs at `/var/log/knot/knot.log`.
GeoIP Not Working
Ensure the GeoIP database is installed correctly. Test with:
geoiplookup 8.8.8.8
If no result is returned, reinstall the GeoIP database.
References
Related infrastructure & engineering guides: High-RAM Cloud VPS for Self-Hosted LLMs & API Gateways
High-RAM Cloud VPS Plans Optimized for AI, Databases & Cache
Enterprise RAID 10 NVMe SSDs, CMC & FPT District 9 uplinks with Anycast Anti-DDoS and 99.99% SLA.
VPS-4E
10% VAT included
- CPU: 4 vCPU
- RAM: 8 GB
- SSD: 50 GB NVMe
