Back to articles
AI & Cloud

Configure VPS as Multi-Protocol IoT Gateway with EMQX and VerneMQ for IoT Startups

Detailed guide to configure a VPS as a multi-protocol IoT gateway using EMQX and VerneMQ, handling hundreds of thousands of smart devices with low cost and high performance for IoT...

DPTCloud Engineering4 min read
Configure VPS as Multi-Protocol IoT Gateway with EMQX and VerneMQ for IoT Startups

For IoT startups, managing hundreds of thousands of smart devices with low cost and high performance is a major challenge. An effective solution is to use a high-RAM VPS as a multi-protocol IoT gateway, integrating platforms like EMQX and VerneMQ. This guide provides a detailed configuration to turn a VPS into a powerful IoT processing center, supporting multiple protocols such as MQTT, CoAP, and HTTP, ideal for startups with limited resources.

Introduction to EMQX and VerneMQ

EMQX and VerneMQ are two popular MQTT brokers designed to handle millions of simultaneous connections. EMQX stands out for its strong scalability, support for diverse protocols, and integration with data analytics systems. VerneMQ, although lighter, offers high performance and good scalability, especially suitable for small to medium-sized IoT applications.

Prerequisites Before Configuration

  • VPS with 8GB RAM or more (optimally 16GB or higher)
  • Stable, high-speed internet connection
  • Operating system: Ubuntu 20.04/22.04 or CentOS 8
  • Software: Docker, Docker Compose

Configure EMQX on VPS

EMQX can be deployed easily via Docker. Below is the basic configuration command:

# Create docker-compose.yml file
cat < docker-compose.yml
version: '3.8'

services:
  emqx:
    image: emqx/emqx:5.0.11
    container_name: emqx
    ports:
      - "1883:1883"       # MQTT
      - "8083:8083"       # MQTT over WebSockets
      - "8084:8084"       # HTTP API
      - "18083:18083"     # EMQX Dashboard
    volumes:
      - ./data:/opt/emqx/data
      - ./log:/opt/emqx/log
    environment:
      - EMQX_NAME=emqx
      - [email protected]
      - EMQX_CLUSTER__DISCOVERY=static
      - [email protected]
EOF

# Start EMQX
docker-compose up -d

Configure VerneMQ on VPS

VerneMQ also supports Docker deployment. Below is the basic configuration:

# Create docker-compose.yml file
cat < docker-compose.yml
version: '3.8'

services:
  vernemq:
    image: vernemq/vernemq:1.13.0
    container_name: vernemq
    ports:
      - "1883:1883"
      - "8080:8080"       # API
      - "18080:18080"     # Dashboard
    environment:
      - VMQ_PASSWORD=yourpassword
      - VMQ_ACL=1
      - VMQ_ALLOW_ANONYMOUS=1
      - VMQ_HOST=0.0.0.0
    volumes:
      - ./data:/var/lib/vernemq
      - ./log:/var/log/vernemq
EOF

# Start VerneMQ
docker-compose up -d

Connect IoT Devices

IoT devices can connect to the VPS via the MQTT protocol. Below is an example using Python to send data:

import paho.mqtt.client as mqtt

client = mqtt.Client("iot_device")
client.username_pw_set("device_user", "device_password")
client.connect("your_vps_ip", 1883, 60)

client.publish("sensors/temperature", "25.5")
client.disconnect()

Testing and Verification

To verify system operation, you can use tools like MQTT.fx or MQTT Explorer to subscribe and receive data from topics. Additionally, use the following commands to check broker status:

# Check EMQX status
curl -X GET http://localhost:18083/api/v4/health

# Check VerneMQ status
curl -X GET http://localhost:18080/api/v1/health

Resource Optimization Solutions

To optimize performance, you can:

  • Run EMQX and VerneMQ on separate containers to separate load
  • Use Proxmox to create dedicated VMs for each service (see: Flower-Print Proxmox on Powerful VPS)
  • Apply auto-scaling when load increases

Troubleshooting

  • Cannot connect to MQTT: Check firewall, ensure port 1883 is open
  • Broker does not receive data: Verify username/password, correct topic
  • Low performance: Increase RAM, use SSD, optimize broker configuration

References

Configuring a VPS as a multi-protocol IoT gateway with EMQX and VerneMQ enables IoT startups to manage hundreds of thousands of smart devices with low cost, high performance, and flexible scalability.

Related infrastructure & engineering guides: High-RAM Cloud VPS for Self-Hosted LLMs & API Gateways

DPTCloud Tier III Infrastructure

High-RAM Cloud VPS Plans Optimized for AI, Databases & Cache

Enterprise RAID 10 NVMe SSDs, CMC & FPT District 9 uplinks with Anycast Anti-DDoS and 99.99% SLA.

View 22 VPS Plans
ECO · vn-02Recommended

VPS-4E

297.000 ₫ / mo

10% VAT included

  • CPU: 4 vCPU
  • RAM: 8 GB
  • SSD: 50 GB NVMe
ECO · vn-02

VPS-5E

614.900 ₫ / mo

10% VAT included

  • CPU: 8 vCPU
  • RAM: 16 GB
  • SSD: 100 GB NVMe
ADVANCED · vn-03Recommended

VPS-4T

548.900 ₫ / mo

10% VAT included

  • CPU: 4 vCPU
  • RAM: 8 GB
  • SSD: 50 GB NVMe

Related Articles

View all
ZaloZalo SupportDiscord0384 753 478