Back to articles
AI & Cloud

Optimizing Smart Home Security Monitoring with Frigate NVR and Coral AI on a Home Server

A detailed guide on deploying an efficient smart home security system using Frigate NVR and Coral AI on a home server, leveraging AI for object detection and performance optimization.

DPTCloud Engineering4 min read
Optimizing Smart Home Security Monitoring with Frigate NVR and Coral AI on a Home Server

Image credit: geralt · Pixabay Content License

Introduction to Smart Home Security Monitoring with Frigate NVR and Coral AI

In the digital age, protecting assets and ensuring family safety has become increasingly important. Smart home security systems not only monitor activities inside and outside the home but also offer intelligent object recognition through artificial intelligence (AI). In this guide, we’ll explore how to deploy an effective, cost-efficient, and privacy-focused security monitoring system using Frigate NVR and Coral AI on a home server.

Why Choose Frigate NVR and Coral AI?

Frigate NVR is open-source software designed to process video from IP cameras, integrating AI to detect objects such as people, vehicles, and pets. It runs efficiently on personal servers and allows full control over video data, eliminating the risk of data leaks through cloud platforms.

Coral AI is a compact hardware accelerator designed for on-device AI inference, enabling data processing directly at the source without sending it to the cloud. When paired with Frigate, Coral AI speeds up object detection, reduces server load, and improves response time.

System Requirements and Initial Setup

Prerequisites

  • A home server (e.g., an old PC, mini PC, or Raspberry Pi 4/5)
  • IP cameras supporting RTSP or ONVIF
  • Coral AI device (USB Accelerator or Dev Board)
  • Linux operating system (Ubuntu 22.04 LTS or equivalent)
  • Docker and Docker Compose installed

Installing Frigate NVR

Run the following command to start Frigate with a basic configuration:

docker run -d \
  --name frigate \
  --restart=unless-stopped \
  -e FRIGATE_CAMERA_CONFIG="camera1:rtsp://user:[email protected]:554/stream" \
  -v /path/to/config:/config \
  -v /path/to/videos:/media/frigate/videos \
  -v /dev/bus/usb:/dev/bus/usb \
  -p 5000:5000 \
  -p 1935:1935 \
  --device /dev/bus/usb:/dev/bus/usb \
  --shm-size=1g \
  ghcr.io/blakeblackshear/frigate:stable-amd64

Setting Up Object Detection with Coral AI

To use Coral AI, you must install an object detection model (e.g., YOLOv8, SSD) and configure Frigate to utilize the Coral device. Add the following configuration to your config.yml file:

detectors:
  coral:
    type: edgetpu
    device: usb

Verify that the Coral device is properly connected by running:

lsusb | grep -i coral

Testing and Verifying the Setup

Verifying the Setup

After starting Frigate, access the web interface at http://home-server-ip:5000. Check that all cameras are detected and displayed correctly.

To test object detection, place an object in front of the camera and verify that Frigate detects and logs the event. You can view logs using:

docker logs frigate

Troubleshooting Common Issues

Troubleshooting

  • Camera not showing: Verify RTSP stream, video format, and access permissions.
  • Coral not detected: Ensure the device is connected to the correct USB port and has the proper drivers installed.
  • Low performance: Increase shm-size or reduce camera resolution.

References

DPTCloud Tier III Infrastructure

High-RAM Cloud VPS Plans Optimized for AI, Databases & Cache

Enterprise RAID 10 NVMe SSDs, CMC & FPT District 9 uplinks with Anycast Anti-DDoS and 99.99% SLA.

View 22 VPS Plans
ECO · vn-02Recommended

VPS-4E

297.000 ₫ / mo

10% VAT included

  • CPU: 4 vCPU
  • RAM: 8 GB
  • SSD: 50 GB NVMe
ECO · vn-02

VPS-5E

614.900 ₫ / mo

10% VAT included

  • CPU: 8 vCPU
  • RAM: 16 GB
  • SSD: 100 GB NVMe
ADVANCED · vn-03Recommended

VPS-4T

548.900 ₫ / mo

10% VAT included

  • CPU: 4 vCPU
  • RAM: 8 GB
  • SSD: 50 GB NVMe

Related Articles

View all
ZaloZalo SupportDiscord0384 753 478