Back to articles
DevOps & Systems

Guide to Setting Up Kube-Ops-View on k3s for Real-Time Container System Visualization on VPS

This guide provides a detailed walkthrough for deploying Kube-Ops-View on k3s to visualize container systems in real time on a VPS. It covers installation, configuration, and...

DPTCloud Engineering5 min read
Guide to Setting Up Kube-Ops-View on k3s for Real-Time Container System Visualization on VPS

This guide provides a detailed walkthrough for deploying Kube-Ops-View on k3s to visualize container systems in real time on a VPS. It covers installation, configuration, and verification steps, enabling DevOps teams to monitor container performance, resource usage, and system activity effectively. The setup leverages k3s, a lightweight Kubernetes distribution, and Helm for streamlined deployment on Linux-based VPS environments.

Introduction

Kube-Ops-View is a real-time container visualization tool that enables administrators to monitor the state, performance, and activity of containers within a Kubernetes cluster. With k3s—optimized for edge and lightweight environments—deploying Kube-Ops-View on a VPS becomes straightforward and efficient. This guide walks through the complete setup process, ensuring you can visualize your containerized workloads in real time on any VPS running Linux.

Prerequisites

  • One VPS with Linux OS (Ubuntu 20.04/22.04 or Debian 11)
  • k3s installed and running on the VPS
  • SSH access to the VPS
  • curl, kubectl, and Helm (if required)

Setting Up Kube-Ops-View on k3s

To deploy Kube-Ops-View, follow these steps:

1. Install Kube-Ops-View Using Helm

Run the following commands on your VPS:

curl -sSL https://get.helm.sh | sh
helm repo add kubeops-view https://kubeops-view.github.io/kubeops-view/
helm repo update
helm install kubeops-view kubeops-view/kubeops-view --namespace kubeops --create-namespace

2. Configure Access

To access Kube-Ops-View, open port 8080 or use port-forwarding:

kubectl port-forward -n kubeops svc/kubeops-view 8080:80

Then, access http://localhost:8080 from your local machine.

3. Verify Operation

After installation, verify Kube-Ops-View is running correctly:

  • Run: kubectl get pods -n kubeops
  • Ensure all pods are in the Running state
  • Access the web interface to view active containers

Performance Analysis and Alerts

Once deployed, Kube-Ops-View provides real-time metrics such as CPU, RAM, I/O, and network usage for each container and node. You can configure automatic alerts when resources exceed thresholds. For example, set an alert for CPU usage above 80% or RAM above 70% over a five-minute period.

Security Configuration

To secure the management interface, enable user authentication. Add the auth.enabled option to the Helm chart. Also, deploy an ingress controller like Nginx or Traefik to manage HTTPS access and restrict IP addresses. Example:

helm install kubeops-view kubeops-view/kubeops-view --namespace kubeops --create-namespace \
  --set auth.enabled=true \
  --set ingress.enabled=true \
  --set ingress.hosts[0]=kubeops.example.com

Recovery and Backup

To ensure resilience, regularly back up Kube-Ops-View configuration and data. Pods typically don’t store state, but if you use PersistentVolume, ensure it’s correctly configured. Use kubectl get pv and kubectl get pvc to verify. Back up configuration with helm get values kubeops-view -n kubeops > kubeops-values.yaml.

Testing and Validation

Test the setup by creating a simple test container:

kubectl run test-pod --image=nginx --namespace=default

Check if the pod appears in Kube-Ops-View within 30 seconds. If not, inspect the logs with kubectl logs -n kubeops -l app=kubeops-view.

Detailed Troubleshooting

  • If pods fail to start, check kubectl describe pod -n kubeops for errors (e.g., resource shortages, missing images).
  • If the web interface fails to load, verify the service port with kubectl get svc -n kubeops and ingress with kubectl get ingress -n kubeops if applicable.
  • If Kubernetes API connection fails, verify kubectl config view to ensure the kubeconfig is correct.
  • If no containers appear, confirm k3s is running and can connect to the API server via kubectl get nodes.

Performance Optimization

To improve performance, reduce data collection frequency if needed. In the Helm configuration, set metrics.interval to a higher value (e.g., 15s or 30s). With limited resources, reduce the number of monitored containers or disable unnecessary widgets. Configure resources.limits for the Kube-Ops-View pod to prevent excessive resource consumption.

References

For more information on k3s deployment and system visualization tools, refer to:

DPTCloud Tier III Infrastructure

Recommended NVMe Cloud VPS Plans to Deploy This Setup

Enterprise RAID 10 NVMe SSDs, CMC & FPT District 9 uplinks with Anycast Anti-DDoS and 99.99% SLA.

View 22 VPS Plans
ECO · vn-02

VPS-2E

94.600 ₫ / mo

10% VAT included

  • CPU: 2 vCPU
  • RAM: 2 GB
  • SSD: 30 GB NVMe
ECO · vn-02Recommended

VPS-3E

170.500 ₫ / mo

10% VAT included

  • CPU: 2 vCPU
  • RAM: 4 GB
  • SSD: 50 GB NVMe
BASIC · vn-01Recommended

VPS-05

457.600 ₫ / mo

10% VAT included

  • CPU: 4 vCPU
  • RAM: 8 GB
  • SSD: 50 GB NVMe

Related Articles

View all
ZaloZalo SupportDiscord0384 753 478