Back to articles
Security & Anti-DDoS

Comprehensive Guide to Setting Up a VPS as a Global Filtering Proxy for Family Internet Optimization and Security

A detailed guide on setting up a VPS as a global filtering proxy for family use, optimizing connectivity and enhancing internet security with tools like Pi-hole, DNS over HTTPS, and...

DPTCloud Engineering4 min read
Comprehensive Guide to Setting Up a VPS as a Global Filtering Proxy for Family Internet Optimization and Security

Image credit: TerriC · Pixabay Content License

Introduction

In today's digital age, protecting your family from harmful content and optimizing internet connectivity is essential. A highly effective solution is to set up a Virtual Private Server (VPS) as a global filtering proxy for your entire home network. With the DPTCloud platform, you can deploy a robust, stable, and easy-to-manage security system.

Requirements and Preparation

Before you begin, ensure you have:

  • A VPS from DPTCloud (minimum 1GB RAM, 1 vCPU)
  • SSH access to the VPS (usually root or a user with sudo privileges)
  • The public IP address of the VPS (or a domain name if available)
  • Your home network configured to use the VPS's DNS or proxy

Setting Up the Global Filtering Proxy

We will use Pi-hole for content filtering, DNS over HTTPS (DoH) for enhanced DNS security, and iptables or UFW for firewall configuration.

1. Install Pi-hole

Run the following command on your VPS to install Pi-hole:

curl -sSL https://install.pi-hole.net | bash

During installation, select DNS settings and enable options like "Block ads" and "Block tracking domains."

2. Configure DNS over HTTPS

To enhance security, use DNS over HTTPS instead of standard DNS. Run these commands:

sudo apt update
sudo apt install -y dns-over-https

Then configure DNS in the /etc/dns-over-https.conf file:

server=1.1.1.1
server=8.8.8.8

Restart the service:

sudo systemctl restart dns-over-https

3. Configure the Firewall

Use UFW to manage the firewall. Install and enable UFW:

sudo apt install -y ufw
sudo ufw allow ssh
sudo ufw allow 53/tcp
sudo ufw allow 53/udp
sudo ufw allow 80/tcp
sudo ufw allow 443/tcp
sudo ufw enable

Configure Your Home Network

On your home router, set the DNS to use the VPS's IP address. For example:

  • DNS primary: 192.168.1.100 (VPS IP)
  • DNS secondary: 1.1.1.1 (if needed)

Alternatively, if your router supports it, set up a transparent proxy so all traffic passes through the VPS.

Testing and Verification

To verify the filtering system is working, perform the following steps:

  • Open a browser and visit an ad-heavy site (like google.com) – it should be blocked if Pi-hole is active.
  • Run the command: pihole -c to check Pi-hole status.
  • Try accessing a blocked site to confirm it is blocked.

Troubleshooting

  • No internet access: Check UFW rules to ensure necessary ports (80, 443, 53) are open.
  • Pi-hole not blocking ads: Review Pi-hole's block lists and update them if needed.
  • DNS not working: Verify network connectivity and DNS configuration on the router.

References

DPTCloud Tier III Infrastructure

Recommended NVMe Cloud VPS Plans to Deploy This Setup

Enterprise RAID 10 NVMe SSDs, CMC & FPT District 9 uplinks with Anycast Anti-DDoS and 99.99% SLA.

View 22 VPS Plans
ECO · vn-02

VPS-2E

94.600 ₫ / mo

10% VAT included

  • CPU: 2 vCPU
  • RAM: 2 GB
  • SSD: 30 GB NVMe
ECO · vn-02Recommended

VPS-3E

170.500 ₫ / mo

10% VAT included

  • CPU: 2 vCPU
  • RAM: 4 GB
  • SSD: 50 GB NVMe
BASIC · vn-01Recommended

VPS-05

457.600 ₫ / mo

10% VAT included

  • CPU: 4 vCPU
  • RAM: 8 GB
  • SSD: 50 GB NVMe

Related Articles

View all
ZaloZalo SupportDiscord0384 753 478