Back to articles
AI & Cloud

Comprehensive Guide to Building a Personal Residential Proxy Station with Squid and ARM VPS for MMO Account Management

A detailed guide on setting up a personal residential proxy using Squid on an ARM VPS to effectively manage MMO accounts safely and cost-efficiently.

DPTCloud Engineering5 min read
Comprehensive Guide to Building a Personal Residential Proxy Station with Squid and ARM VPS for MMO Account Management

Image credit: TheDigitalArtist · Pixabay Content License

Overview of Personal Proxy Stations for MMO

In an era where online multiplayer game (MMO) platforms enforce strict account controls, using a personal residential proxy has become a critical solution for safely managing accounts and avoiding bans or detection of suspicious behavior. A personal proxy station mimics real user IP addresses, enhancing anonymity and reducing the risk of detection.

This guide walks you through building a complete personal proxy station using Squid—an open-source proxy server—on an ARM VPS (e.g., a 4GB RAM ARM VPS) to optimize cost and performance. This method is ideal for individuals or small businesses seeking full control over their proxy infrastructure without relying on expensive third-party services.

Requirements and Preparation

To deploy a personal proxy using the proxy on an ARM VPS, you will need:

  • An ARM VPS with at least 4GB RAM and 10GB SSD (recommended: High-RAM Cloud VPS for Self-Hosted LLMs & API Gateways)
  • Linux operating system (Ubuntu 22.04 LTS recommended)
  • SSH access with root privileges
  • A public IPv4 address from your VPS provider
  • An administrator account with sudo rights

Setting Up Squid Proxy on ARM VPS

Follow these steps to install and configure the proxy:

# Update the system sudo apt update && sudo apt upgrade -y # Install Squid sudo apt install squid -y # Backup the original configuration file sudo cp /etc/squid/squid.conf /etc/squid/squid.conf.bak # Open the configuration file for editing sudo nano /etc/squid/squid.conf

Modify the squid.conf file with the following basic settings:

# Configure proxy port http_port 3128 # Allow access from all IPs (adjust if needed) acl localnet src 0.0.0.0/0 # Set access permissions http_access allow localnet # Disable logging (optimize performance) cache_log /dev/null access_log /dev/null # Disable SSL inspection (if not required) ssl_bump none # Optimize memory cache cache_mem 256 MB maximum_object_size 100 MB

Restart the proxy service:

sudo systemctl restart squid sudo systemctl enable squid

Running Squid in Automatic Mode and Testing

The proxy is now configured and running. To verify its operation, use the following command:

curl -x http://YOUR_VPS_IP:3128 -I http://ipinfo.io/json

If the response returns the VPS’s IP address, the proxy is functioning correctly.

Optimization and Security

To enhance security and performance, consider the following:

  • Configure a firewall (UFW) to allow only port 3128
  • Run Squid under a non-root user account
  • Integrate with fail2ban to block malicious attacks
  • Set up log rotation and store logs securely

Troubleshooting Common Issues

  • Cannot access the proxy: Check UFW rules, port status, and verify Squid is running with sudo systemctl status squid.
  • Squid fails to accept connections: Review squid.conf, especially the http_access and http_port directives.
  • Low performance: Increase cache_mem or reduce concurrent connections.

References

Practical Testing and Verification

To verify that your proxy on ARM VPS is working correctly, perform the following safe and non-destructive tests. These checks do not impact proxy operations or user data.

Requirements: You need a remote machine (e.g., personal computer or another VPS) with curl installed and access to the ARM VPS configured with Squid.

Assumptions: The VPS runs Ubuntu 22.04, the proxy is installed and running on port 3128, UFW allows port 3128, and no external firewalls or proxy blockers are active.

# Test proxy connection using curl, replace YOUR_VPS_IP with the public IP of your VPS
# No authentication required, only testing connectivity and returned IP
curl -x http://YOUR_VPS_IP:3128 -s -o /dev/null -w "%{http_code}\n" http://ipinfo.io/json

# Wait a few seconds; if 200 is returned, the proxy is working
# If 403 or 502 is returned, review Squid configuration and UFW settings

Run this command from a remote machine. If the HTTP status code is 200 and the JSON response contains the VPS IP address, the proxy is working correctly and responding properly.

Limitations: This test only checks basic connectivity and response. It does not verify anonymity, speed, or handling of multiple connections. Do not run this command in production environments without permission.

Recommendation: After verification, check Squid logs to confirm requests are being recorded: sudo tail -n 20 /var/log/squid/access.log. If entries show connections from accessing IPs, the proxy is operational.

DPTCloud Tier III Infrastructure

High-RAM Cloud VPS Plans Optimized for AI, Databases & Cache

Enterprise RAID 10 NVMe SSDs, CMC & FPT District 9 uplinks with Anycast Anti-DDoS and 99.99% SLA.

View 22 VPS Plans
ECO · vn-02Recommended

VPS-4E

297.000 ₫ / mo

10% VAT included

  • CPU: 4 vCPU
  • RAM: 8 GB
  • SSD: 50 GB NVMe
ECO · vn-02

VPS-5E

614.900 ₫ / mo

10% VAT included

  • CPU: 8 vCPU
  • RAM: 16 GB
  • SSD: 100 GB NVMe
ADVANCED · vn-03Recommended

VPS-4T

548.900 ₫ / mo

10% VAT included

  • CPU: 4 vCPU
  • RAM: 8 GB
  • SSD: 50 GB NVMe

Related Articles

View all
ZaloZalo SupportDiscord0384 753 478