Back to articles
Security & Anti-DDoS

Guide to Self-Hosting a WireGuard VPN Server on High-Speed VPS for Absolute Business Security

A detailed guide on building a WireGuard VPN server on a high-speed VPS, ensuring absolute security for businesses. Covers installation, configuration, and performance optimization...

DPTCloud Engineering4 min read
Guide to Self-Hosting a WireGuard VPN Server on High-Speed VPS for Absolute Business Security

Introduction to WireGuard and Business Benefits

WireGuard là giao thức VPN hiện đại, nhẹ và hiệu suất cao được thiết kế để thay thế các giao thức cũ như OpenVPN. Với kiến trúc đơn giản và mã nguồn mở, WireGuard mang lại tốc độ nhanh, bảo mật tuyệt đối và triển khai dễ dàng. Đối với doanh nghiệp, tự xây dựng máy chủ VPN WireGuard trên VPS tốc độ cao đảm bảo an toàn dữ liệu, truy cập từ xa an toàn và chi phí vận hành tối ưu.

Prerequisites and Preparation

Để triển khai thành công WireGuard, bạn cần:

  • A Linux-based VPS (Ubuntu 20.04 or higher recommended).
  • SSH access with root or sudo privileges.
  • A public IP address (static IP preferred).
  • WireGuard client software installed on client devices (Windows, macOS, Linux, Android, iOS).

Installing and Configuring WireGuard on VPS

Thực hiện các bước sau để cài đặt và cấu hình WireGuard:

# Update the system
sudo apt update && sudo apt upgrade -y

# Install WireGuard
sudo apt install wireguard -y

# Generate public and private keys
wg genkey | sudo tee /etc/wireguard/private.key | wg pubkey | sudo tee /etc/wireguard/public.key

# Create the server configuration file
sudo nano /etc/wireguard/wg0.conf

Insert the following content into the configuration file:

[Interface]
PrivateKey = 
Address = 10.0.0.1/24
ListenPort = 51820
PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE

[Peer]
PublicKey = 
AllowedIPs = 10.0.0.2/32

Replace `` with your generated private key and `` with the client's public key.

Starting and Testing the Connection

Bắt đầu dịch vụ WireGuard:

sudo wg-quick up wg0
sudo systemctl enable wg-quick@wg0

Check the connection status with:

sudo wg show

This command displays the connection status and connected peers.

Optimization and Security

To ensure absolute security, follow these steps:

  • Disable IPv6 if not required.
  • Use a firewall to restrict access to port 51820.
  • Set strong SSH passwords.
  • Regularly update the system and WireGuard.

Learn more about network security at Network Security & 99.98% SLA Infrastructure at DPTCloud.

Testing and Troubleshooting

If you cannot connect, verify the following:

  • Correct configuration file name.
  • Accurate public and private keys.
  • No firewall blocking port 51820.
  • Public IP not blocked.

View logs using:

sudo journalctl -u wg-quick@wg0 -f

References

Để biết thêm thông tin về WireGuard, tham khảo tài liệu chính thức tại https://www.wireguard.com/.

Related infrastructure & engineering guides: Deploy RustDesk with a Private IDRelay Server: High-Performance and Secure Remote Computer Control

DPTCloud Tier III Infrastructure

Recommended NVMe Cloud VPS Plans to Deploy This Setup

Enterprise RAID 10 NVMe SSDs, CMC & FPT District 9 uplinks with Anycast Anti-DDoS and 99.99% SLA.

View 22 VPS Plans
ECO · vn-02

VPS-2E

94.600 ₫ / mo

10% VAT included

  • CPU: 2 vCPU
  • RAM: 2 GB
  • SSD: 30 GB NVMe
ECO · vn-02Recommended

VPS-3E

170.500 ₫ / mo

10% VAT included

  • CPU: 2 vCPU
  • RAM: 4 GB
  • SSD: 50 GB NVMe
BASIC · vn-01Recommended

VPS-05

457.600 ₫ / mo

10% VAT included

  • CPU: 4 vCPU
  • RAM: 8 GB
  • SSD: 50 GB NVMe

Related Articles

View all
ZaloZalo SupportDiscord0384 753 478