Using eBPF Falco to Detect and Automatically Isolate Container Violations of Docker Hardening Policies
A detailed guide on deploying Falco with eBPF to detect and automatically isolate containers violating Docker Hardening policies, enhancing container security on DPTCloud.
Introduction to eBPF and Falco in Container Security
Trong môi trường container hóa hiện nay, việc bảo vệ hệ thống Docker khỏi hành vi bất thường là rất quan trọng. Falco là một công cụ giám sát sự kiện hệ thống nguồn mở được thiết kế để phát hiện vi phạm chính sách bảo mật trong môi trường containerized. Khi kết hợp với eBPF (Extended Berkeley Packet Filter), nó có thể hoạt động hiệu quả ở cấp kernel, cho phép giám sát thời gian thực các hệ thống gọi, hoạt động I/O và thay đổi cấu hình mà không cần sửa đổi mã ứng dụng.
Hướng dẫn này trình bày cách triển khai Falco với eBPF để phát hiện và tự động cách ly các container vi phạm chính sách hardening Docker, nâng cao bảo mật cho hệ thống container trên DPTCloud.
Prerequisites: Environment Setup
Để triển khai Falco với eBPF, hãy đảm bảo các điều kiện tiên quyết sau được đáp ứng:
- Ubuntu 20.04+ or CentOS 8+ with kernel 5.10 or higher (to support eBPF)
- Docker installed and running
- eBPF tools:
bpftool,libbpf, andclang - Root access to a DPTCloud VPS
- Ability to install monitoring tools such as
sysdig(used by Falco)
Deploying Falco with eBPF
We will deploy Falco using Docker and configure it to use eBPF instead of traditional sysdig. First, install the required eBPF tools:
sudo apt update
sudo apt install -y clang llvm bpftool libbpf-dev
Tiếp theo, chạy Falco bằng Docker:
docker run -d --name falco \
--privileged \
-v /var/run/docker.sock:/var/run/docker.sock \
-v /dev:/dev \
-v /proc:/host/proc:ro \
-v /boot:/host/boot:ro \
-v /lib/modules:/lib/modules:ro \
-v /usr/src:/usr/src:ro \
-v /etc/falco/falco.yaml:/etc/falco/falco.yaml:ro \
-v /var/log/falco:/var/log/falco \
falcosecurity/falco:latest
In the /etc/falco/falco.yaml configuration file, enable eBPF and define rules for detecting Docker Hardening policy violations:
---
# Use eBPF instead of sysdig
ebpf:
enabled: true
# Optional: specify the eBPF program path
program_path: /usr/share/falco/eBPF/falco_bpf.o
# Define rules to detect violations of Docker Hardening policies
rules:
- rule: Detect container with privileged mode
desc: "Container running with privileged mode, which violates Docker Hardening policy"
condition: container and privileged and not container_name: "falco"
output: "Privileged container detected (container=%container.name)"
priority: Critical
tags: [container, privilege]
- rule: Detect container with host network
desc: "Container using host network, violating Docker Hardening policy"
condition: container and host_network and not container_name: "falco"
output: "Container using host network (container=%container.name)"
priority: High
tags: [container, network]
- rule: Detect container with mounted host filesystem
desc: "Container mounted host filesystem, violating Docker Hardening policy"
condition: container and mount_host_fs and not container_name: "falco"
output: "Container mounted host filesystem (container=%container.name)"
priority: High
tags: [container, filesystem]
Running and Testing
Sau khi cấu hình, kiểm tra xem Falco đang hoạt động:
docker logs falco
Nếu Falco hoạt động đúng, bạn sẽ thấy các sự kiện được ghi lại. Để kiểm tra phát hiện, hãy tạo một container với chế độ đặc quyền:
docker run --privileged -it ubuntu /bin/bash
Falco will immediately detect this behavior and log a warning. You can configure Falco to automatically isolate the violating container by integrating with tools like iptables or the docker API to block traffic from the affected container.
Verifying and Troubleshooting
To verify eBPF is loaded correctly, run:
bpftool prog list
Nếu chương trình Falco xuất hiện trong danh sách, eBPF đã được tải thành công. Nếu không, hãy kiểm tra:
- Kernel support for eBPF (verify with
uname -r) - Correct installation of
libbpfandclang - Whether
bpftoolis installed
If Falco fails to detect events, review logs at /var/log/falco/falco.log for errors.
References
Recommended NVMe Cloud VPS Plans to Deploy This Setup
Enterprise RAID 10 NVMe SSDs, CMC & FPT District 9 uplinks with Anycast Anti-DDoS and 99.99% SLA.
VPS-3E
10% VAT included
- CPU: 2 vCPU
- RAM: 4 GB
- SSD: 50 GB NVMe
