DPTCloud
Back to articles
Technology Insight

Scaling Density: Running 100+ Isolated MicroVMs on a Single VPS with Firecracker and TAP Networking

June 1, 2026

Introduction: The Quest for Ultimate Resource Efficiency

In the evolving landscape of cloud computing, infrastructure architects constantly seek the optimal balance between security isolation and resource density. Traditional Virtual Machines (VMs) provide robust security boundaries but suffer from heavy memory footprints and slow boot times. On the other hand, traditional containers offer lightweight agility but share the host OS kernel, introducing potential multi-tenant security vulnerabilities.

Enter AWS Firecracker, an open-source minimalist Virtual Machine Monitor (VMM) written in Rust. Specifically designed for serverless containers and function-as-a-service (FaaS) workloads, Firecracker enables you to launch ephemeral, fully isolated virtual environments—known as microVMs—in milliseconds. But how far can we push this technology on standard hardware? In this deep-dive technical guide, we will demonstrate how to architect, configure, and run over 100 completely isolated microVMs on a single standard Virtual Private Server (VPS) using Firecracker and virtualized TAP network routing.

---

Why Firecracker? The Architecture of MicroVMs

To understand how running 100+ microVMs on a single host is possible, we must look at what Firecracker strips away. Unlike traditional QEMU-based virtualization, Firecracker deliberately omits legacy devices and unnecessary PCI buses. It provides only what is essential to run a modern Linux kernel: a minimalist virtio device model (including net, block, and vsock), a serial console, and a partial keyboard controller.

Key Benefit: Because of this ultra-lean design, a Firecracker microVM can boot in less than 5 milliseconds and consume as little as 5 MiB of RAM at startup. This low overhead is the exact mechanism that unlocks extreme multi-tenant density on a single bare-metal or nested-virtualization VPS host.
---

Prerequisites and Host Machine Environment

Before proceeding, ensure your VPS meets the foundational requirements for hardware-assisted virtualization. Firecracker requires Kernel-based Virtual Machine (KVM) support.

  • Processor: Intel or AMD CPU with VT-x/AMD-V virtualization extensions enabled (nested virtualization must be supported if your host is already a VPS).
  • Operating System: Linux kernel version 4.14 or higher (Ubuntu 22.04 LTS or newer is highly recommended).
  • Permissions: Full root or sudo access to manage network interfaces, iptables, and system limits.

To verify KVM compatibility on your host, execute the following command in your terminal:

kvm-ok

If KVM is available, you are ready to prepare the environment by downloading the Firecracker binary and preparing your kernel and root filesystem (rootfs) images.

---

The Network Architecture: Virtualized TAP Interfaces and Routing

The primary bottleneck when scaling to 100+ independent microVMs is not just memory or CPU scheduling—it is networking. Each microVM requires an isolated, secure network pipeline to communicate with the host, other microVMs, or the public internet without overlapping IP spaces.

Our architectural solution utilizes TAP interfaces coupled with host-level routing and Network Address Translation (NAT) via iptables. A TAP device is a virtual network interface that operates at the Data Link layer (Layer 2), acting like an Ethernet switch port. By provisioning a unique TAP device for every single microVM, we establish an explicit point-to-point network boundary.

The IP Addressing Scheme

To systematically manage 100+ microVMs, we define a structured subnet hierarchy. We can assign each microVM a small /30 or /31 subnet, or utilize host routing to assign specific unique IPs within a dedicated private network block (e.g., 172.16.0.0/16). For simplicity and strict isolation, we will allocate a specific point-to-point IP mapping for each microVM ID ($N$):

  • Host TAP IP: 172.16.$N$.1
  • MicroVM IP: 172.16.$N$.2
  • Subnet Mask: 255.255.255.252 (/30)
---

Step-by-Step Implementation Guide

Step 1: Setting up Host Dependencies and Kernel Images

First, obtain a compiled uncompressed Linux kernel binary (vmlinux) and an ext4-formatted root filesystem image. You can build these from source or download pre-compiled artifacts provided in the official Firecracker GitHub repository.

Step 2: Automating Network Provisioning

Manually creating 100 network interfaces is inefficient and prone to human error. We will utilize a shell script to automate the creation of the TAP interfaces, enable IP forwarding, and configure the firewall routing metrics.

#!/bin/bash
# Enable IP Forwarding on the host
sudo sysctl -w net.ipv4.ip_forward=1

# Configure NAT on the main public interface (e.g., eth0)
sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

# Loop to create 100+ TAP interfaces
for i in {1..105}
do
    TAP_NAME="tap$i"
    HOST_IP="172.16.$i.1"
    
    # Create the TAP device
    sudo ip tuntap add dev $TAP_NAME mode tap
    sudo ip addr add $HOST_IP/30 dev $TAP_NAME
    sudo ip link set $TAP_NAME up
done

Step 3: Configuring and Launching the Firecracker Instances

Firecracker is configured using a REST API exposed over a local Unix domain socket. To launch 100 instances simultaneously, we must loop through separate sockets (e.g., /tmp/firecracker-$i.socket) and send JSON configuration payloads to define the kernel, rootfs, and the respective TAP network interface.

An example configuration payload for microVM #45 sent via curl looks like this:

curl --unix-socket /tmp/firecracker-45.socket -X PUT \
  'http://localhost/network-interfaces/eth0' \
  -H 'Accept: application/json' \
  -H 'Content-Type: application/json' \
  -d '{
      "iface_id": "eth0",
      "host_dev_name": "tap45"
    }'

Inside microVM #45, the boot arguments must include the static network layout: ip=172.16.45.2::172.16.45.1:255.255.255.252::eth0:off. This ensures that the guest OS boots immediately with its designated IP without waiting for DHCP timeouts.

---

Optimizing for High Density: Tuning Host System Limits

Launching over 100 microVMs simultaneously will trigger default Linux OS bottlenecks if left unoptimized. To ensure system stability and performance, you must modify specific kernel parameters and resource constraints.

1. File Descriptors (ulimit)

Each Firecracker process opens multiple files, sockets, and API channels. Modify /etc/security/limits.conf to prevent "Too many open files" errors:

  • * soft nofile 500000
  • * hard nofile 500000

2. Memory Overcommit and cgroups

To guarantee that your host doesn't randomly kill microVMs under memory pressure, configure memory allocations strictly. If you provision each microVM with 128 MiB of RAM, 100 microVMs require roughly 12.8 GiB of system memory. Use cgroups (Control Groups) to enforce strict CPU and memory limits per microVM process, preventing a single compromised or runaway microVM from impacting neighboring instances.

---

Conclusion: The Future of Lightweight Virtualization

By leveraging AWS Firecracker and virtualized TAP network routing, you can transform a standard VPS into a massively scalable hyper-dense micro-cloud framework. Providing absolute hardware-isolated security boundaries at the speed and cost of traditional containers opens up immense opportunities for multi-tenant SaaS providers, secure sandboxed execution platforms, edge computing architectures, and cost-efficient CI/CD pipelines.

As cloud infrastructure shifts toward finer-grained execution models, mastering minimalist virtualization technologies ensures your applications remain secure, incredibly fast, and optimally cost-efficient.

Scaling Density: Running 100+ Isolated MicroVMs on a Single VPS with Firecracker and TAP Networking | DPTCloud